Polymaker
PolyLite PLA
Print parameters
| Diameter | 2.85 mm |
|---|---|
| Nozzle | 190–230 °C |
| Bed | 25–60 °C |
| Speed | 50–200 mm/s |
| Fan | — |
| Drying (temp / time) | 55 °C / 6 h |
| Density | 1.17 g/cm³ |
Mechanical & thermal properties
| Tensile strength | 52.3/40.5XY/ZMPa |
|---|---|
| Tensile modulus | 3426.9/3064.9XY/ZMPa |
| Elongation at break | 6.3/1.8XY/Z% |
| Flexural strength | 86.9/–XY/ZMPa |
| Impact strength | 3.3/–XY/ZkJ/m² |
| Hardness | — |
| HDT (heat deflection) | 58°C |
| Glass transition (Tg) | 61 °C |
| VICAT | 63°C |
Manufacturer data
This data comes from the manufacturer's technical sheets and website. FilamentCat only displays it — I don't guarantee it; verify with the manufacturer before printing. Values may vary by printer and conditions.