Polymaker
Polymaker HT-PLA Pro
PLA1.75 mm
Print parameters
| Diameter | 1.75 mm |
|---|---|
| Nozzle | 230 °C |
| Bed | 25–65 °C |
| Speed | ≤ 300 mm/s |
| Fan | — |
| Drying (temp / time) | 60 °C / 6 h |
| Density | 1.24 g/cm³ |
Mechanical & thermal properties
| Tensile strength | 37.6MPa |
|---|---|
| Tensile modulus | 2270MPa |
| Elongation at break | 13% |
| Flexural strength | 60.1MPa |
| Impact strength | 9.94kJ/m² |
| Hardness | — |
| HDT (heat deflection) | 56.3°C |
| Glass transition (Tg) | 59.15 °C |
| VICAT | 148.3°C |
Manufacturer data
This data comes from the manufacturer's technical sheets and website. FilamentCat only displays it — I don't guarantee it; verify with the manufacturer before printing. Values may vary by printer and conditions.