Polymaker
PolyMax PETG
PETG1.75 mm
Print parameters
| Diameter | 1.75 mm |
|---|---|
| Nozzle | 230–240 °C |
| Bed | 70–80 °C |
| Speed | 30–50 mm/s |
| Fan | 0–20 % |
| Drying (temp / time) | 65 °C / 6 h |
| Density | 1.24 g/cm³ |
Mechanical & thermal properties
| Tensile strength | –/28.3XY/ZMPa |
|---|---|
| Tensile modulus | 1784.2MPa |
| Elongation at break | 13.1% |
| Flexural strength | 57.3MPa |
| Impact strength | 10kJ/m² |
| Hardness | — |
| HDT (heat deflection) | 72.3°C |
| Glass transition (Tg) | 79 °C |
| VICAT | 82°C |
Data from manufacturer's website
This data comes from the manufacturer's technical sheets and website. FilamentCat only displays it — I don't guarantee it; verify with the manufacturer before printing. Values may vary by printer and conditions.