Polymaker
PolyMax PETG-ESD
PETG1.75 mm
Print parameters
| Diameter | 1.75 mm |
|---|---|
| Nozzle | 250–290 °C |
| Bed | 70–80 °C |
| Speed | 30–50 mm/s |
| Fan | 0–20 % |
| Drying (temp / time) | 65 °C / 6 h |
| Density | 1.24 g/cm³ |
Mechanical & thermal properties
| Tensile strength | –/20.7XY/ZMPa |
|---|---|
| Tensile modulus | 1983MPa |
| Elongation at break | 7.3% |
| Flexural strength | 54MPa |
| Impact strength | 5.7kJ/m² |
| Hardness | — |
| HDT (heat deflection) | 72°C |
| Glass transition (Tg) | 77 °C |
| VICAT | 86°C |
Data from manufacturer's website
This data comes from the manufacturer's technical sheets and website. FilamentCat only displays it — I don't guarantee it; verify with the manufacturer before printing. Values may vary by printer and conditions.