Polymaker
Wood PLA
Print parameters
| Diameter | 2.85 mm |
|---|---|
| Nozzle | 190–210 °C |
| Bed | 25–60 °C |
| Speed | 50–100 mm/s |
| Fan | — |
| Drying (temp / time) | 55 °C / 6 h |
| Density | 0.9 g/cm³ |
Mechanical & thermal properties
| Tensile strength | 24.4/20.8XY/ZMPa |
|---|---|
| Tensile modulus | 1688.5/1726.3XY/ZMPa |
| Elongation at break | 8.8/2XY/Z% |
| Flexural strength | 50.2/–XY/ZMPa |
| Impact strength | 2.4/–XY/ZkJ/m² |
| Hardness | — |
| HDT (heat deflection) | 50°C |
| Glass transition (Tg) | 59 °C |
| VICAT | 60°C |
Manufacturer data
This data comes from the manufacturer's technical sheets and website. FilamentCat only displays it — I don't guarantee it; verify with the manufacturer before printing. Values may vary by printer and conditions.