PrimaCreator
PrimaSelect NylonPower Carbon Fiber
PA-CF1.75 mm
Requires enclosureRequires hardened nozzle
Print parameters
| Diameter | 1.75 mm |
|---|---|
| Nozzle | 250–265 °C |
| Bed | 60–70 °C |
| Speed | 40 mm/s |
| Fan | 20–60 % |
| Drying (temp / time) | — |
| Density | 1 g/cm³ |
Mechanical & thermal properties
| Tensile strength | –/12.64XY/ZMPa |
|---|---|
| Tensile modulus | 2758MPa |
| Elongation at break | 6.7% |
| Flexural strength | 117.9MPa |
| Impact strength | –kJ/m² |
| Hardness | — |
| HDT (heat deflection) | 155°C |
| Glass transition (Tg) | — |
| VICAT | –°C |
Data from manufacturer's website
This data comes from the manufacturer's technical sheets and website. FilamentCat only displays it — I don't guarantee it; verify with the manufacturer before printing. Values may vary by printer and conditions.