PrimaCreator
PrimaSelect OBC
TPE1.75 mm
Print parameters
| Diameter | 1.75 mm |
|---|---|
| Nozzle | 210–240 °C |
| Bed | 70–90 °C |
| Speed | 40–80 mm/s |
| Fan | 0 % |
| Drying (temp / time) | — |
| Density | 0.9 g/cm³ |
Mechanical & thermal properties
| Tensile strength | 12.5MPa |
|---|---|
| Tensile modulus | 550MPa |
| Elongation at break | 800% |
| Flexural strength | 2.5MPa |
| Impact strength | 33.5kJ/m² |
| Hardness | — |
| HDT (heat deflection) | 60°C |
| Glass transition (Tg) | — |
| VICAT | 95°C |
Data from manufacturer's website
This data comes from the manufacturer's technical sheets and website. FilamentCat only displays it — I don't guarantee it; verify with the manufacturer before printing. Values may vary by printer and conditions.