PrimaCreator
PrimaSelect PC
PC1.75 mm
Requires enclosure
Print parameters
| Diameter | 1.75 mm |
|---|---|
| Nozzle | 250–270 °C |
| Bed | 80–100 °C |
| Speed | 40–80 mm/s |
| Fan | 0 % |
| Drying (temp / time) | — |
| Density | 1.2 g/cm³ |
Mechanical & thermal properties
| Tensile strength | 70MPa |
|---|---|
| Tensile modulus | 4400MPa |
| Elongation at break | 13.5% |
| Flexural strength | 91.5MPa |
| Impact strength | 37.5kJ/m² |
| Hardness | — |
| HDT (heat deflection) | 107°C |
| Glass transition (Tg) | — |
| VICAT | 116°C |
Data from manufacturer's website
This data comes from the manufacturer's technical sheets and website. FilamentCat only displays it — I don't guarantee it; verify with the manufacturer before printing. Values may vary by printer and conditions.