Prusament
PETG Tungsten 75
PETG-Metal1.75 mm
Requires hardened nozzle
Composition / filler: PETG + 75% tungsten
Print parameters
| Diameter | 1.75 mm |
|---|---|
| Nozzle | 250–270 °C |
| Bed | 70–90 °C |
| Speed | ≤ 200 mm/s |
| Fan | 50 % |
| Drying (temp / time) | 94 °C / — |
| Density | 4 g/cm³ |
Mechanical & thermal properties
| Tensile strength | 35MPa |
|---|---|
| Tensile modulus | 1900MPa |
| Elongation at break | –% |
| Flexural strength | 59MPa |
| Impact strength | –kJ/m² |
| Hardness | 79D Shore |
| HDT (heat deflection) | 94°C |
| Glass transition (Tg) | — |
| VICAT | –°C |
Verified against manufacturer datasheet
This data comes from the manufacturer's technical sheets and website. FilamentCat only displays it — I don't guarantee it; verify with the manufacturer before printing. Values may vary by printer and conditions.