Prusament
PETG Ultraglow
PETG1.75 mm
Requires hardened nozzle
Print parameters
| Diameter | 1.75 mm |
|---|---|
| Nozzle | 250–270 °C |
| Bed | 75–95 °C |
| Speed | — |
| Fan | — |
| Drying (temp / time) | — |
| Density | 1.5 g/cm³ |
Mechanical & thermal properties
| Tensile strength | 42/43XY/ZMPa |
|---|---|
| Tensile modulus | 1900/1900XY/ZMPa |
| Elongation at break | 3.7/3.9XY/Z% |
| Flexural strength | 59.4/63.3XY/ZMPa |
| Impact strength | 11/10XY/ZkJ/m² |
| Hardness | 77D Shore |
| HDT (heat deflection) | 78°C |
| Glass transition (Tg) | — |
| VICAT | –°C |
Verified against manufacturer datasheet
This data comes from the manufacturer's technical sheets and website. FilamentCat only displays it — I don't guarantee it; verify with the manufacturer before printing. Values may vary by printer and conditions.