Prusament
PLA Blend
PLA1.75 mm
Print parameters
| Diameter | 1.75 mm |
|---|---|
| Nozzle | 200–220 °C |
| Bed | 40–60 °C |
| Speed | — |
| Fan | — |
| Drying (temp / time) | — |
| Density | 1.24 g/cm³ |
Mechanical & thermal properties
| Tensile strength | 32/42XY/ZMPa |
|---|---|
| Tensile modulus | 1600/1900XY/ZMPa |
| Elongation at break | 3/3.5XY/Z% |
| Flexural strength | 47/60XY/ZMPa |
| Impact strength | 13/15XY/ZkJ/m² |
| Hardness | 72D Shore |
| HDT (heat deflection) | 52.5°C |
| Glass transition (Tg) | — |
| VICAT | –°C |
Verified against manufacturer datasheet
This data comes from the manufacturer's technical sheets and website. FilamentCat only displays it — I don't guarantee it; verify with the manufacturer before printing. Values may vary by printer and conditions.