Prusament
PLA Recycled
PLA1.75 mm
Composition / filler: 100% recycled Prusament PLA materials
Print parameters
| Diameter | 1.75 mm |
|---|---|
| Nozzle | 200–220 °C |
| Bed | 40–60 °C |
| Speed | ≤ 200 mm/s |
| Fan | 100 % |
| Drying (temp / time) | — |
| Density | 1.24 g/cm³ |
Mechanical & thermal properties
| Tensile strength | 55MPa |
|---|---|
| Tensile modulus | 2300MPa |
| Elongation at break | 2.9% |
| Flexural strength | 87MPa |
| Impact strength | –kJ/m² |
| Hardness | 80D Shore |
| HDT (heat deflection) | 53°C |
| Glass transition (Tg) | — |
| VICAT | –°C |
Verified against manufacturer datasheet
This data comes from the manufacturer's technical sheets and website. FilamentCat only displays it — I don't guarantee it; verify with the manufacturer before printing. Values may vary by printer and conditions.