purefil
PC
PC1.75 mm
Requires enclosure
Print parameters
| Diameter | 1.75 mm |
|---|---|
| Nozzle | 290–320 °C |
| Bed | 120–150 °C |
| Speed | — |
| Fan | — |
| Drying (temp / time) | 120 °C / 4 h |
| Density | — |
Mechanical & thermal properties
| Tensile strength | 64MPa |
|---|---|
| Tensile modulus | –MPa |
| Elongation at break | 4% |
| Flexural strength | –MPa |
| Impact strength | –kJ/m² |
| Hardness | 82D Shore |
| HDT (heat deflection) | 141°C |
| Glass transition (Tg) | — |
| VICAT | 155°C |
Data from manufacturer's website
This data comes from the manufacturer's technical sheets and website. FilamentCat only displays it — I don't guarantee it; verify with the manufacturer before printing. Values may vary by printer and conditions.