Qidi Tech
ASA-Aero
ASA1.75 mm
Requires enclosure
Composition / filler: ASA with foaming/blowing agent additive
Print parameters
| Diameter | 1.75 mm |
|---|---|
| Nozzle | 240–280 °C |
| Bed | 80–110 °C |
| Speed | 30–90 mm/s |
| Fan | 0–50 % |
| Drying (temp / time) | — |
| Density | 1.03 g/cm³ |
Mechanical & thermal properties
| Tensile strength | 8.25/7.86XY/ZMPa |
|---|---|
| Tensile modulus | 593.99/457.94XY/ZMPa |
| Elongation at break | 11.52/5.54XY/Z% |
| Flexural strength | 14.31/–XY/ZMPa |
| Impact strength | 2.29/–XY/ZkJ/m² |
| Hardness | — |
| HDT (heat deflection) | 55°C |
| Glass transition (Tg) | — |
| VICAT | –°C |
Data from manufacturer's website
This data comes from the manufacturer's technical sheets and website. FilamentCat only displays it — I don't guarantee it; verify with the manufacturer before printing. Values may vary by printer and conditions.