Qidi Tech
PAHT-GF
PA-GF1.75 mm
Requires hardened nozzle
Composition / filler: Semi-aromatic Polyamide (PAHT) with 15% chopped glass fiber reinforcement
Print parameters
| Diameter | 1.75 mm |
|---|---|
| Nozzle | 300–320 °C |
| Bed | 70–90 °C |
| Speed | 30–120 mm/s |
| Fan | 0 % |
| Drying (temp / time) | 90 °C / 5 h |
| Density | 1.27 g/cm³ |
Mechanical & thermal properties
| Tensile strength | 90.5/59.58XY/ZMPa |
|---|---|
| Tensile modulus | 5375.42/3952.22XY/ZMPa |
| Elongation at break | 2.28/1.78XY/Z% |
| Flexural strength | 140.77/–XY/ZMPa |
| Impact strength | 5.84/–XY/ZkJ/m² |
| Hardness | — |
| HDT (heat deflection) | 109.4°C |
| Glass transition (Tg) | — |
| VICAT | –°C |
Data from manufacturer's website
This data comes from the manufacturer's technical sheets and website. FilamentCat only displays it — I don't guarantee it; verify with the manufacturer before printing. Values may vary by printer and conditions.