Qidi Tech
PLA Wood
PLA1.75 mm
Composition / filler: Polylactic Acid (PLA) with wood fiber composite
Print parameters
| Diameter | 1.75 mm |
|---|---|
| Nozzle | 190–220 °C |
| Bed | 30–60 °C |
| Speed | 40–80 mm/s |
| Fan | 50–100 % |
| Drying (temp / time) | — |
| Density | 1.23 g/cm³ |
Mechanical & thermal properties
| Tensile strength | 26.5/–XY/ZMPa |
|---|---|
| Tensile modulus | 4400/–XY/ZMPa |
| Elongation at break | 9/–XY/Z% |
| Flexural strength | 52.5/–XY/ZMPa |
| Impact strength | 13.5/–XY/ZkJ/m² |
| Hardness | — |
| HDT (heat deflection) | 57°C |
| Glass transition (Tg) | 60 °C |
| VICAT | 58°C |
Data from manufacturer's website
This data comes from the manufacturer's technical sheets and website. FilamentCat only displays it — I don't guarantee it; verify with the manufacturer before printing. Values may vary by printer and conditions.