Qidi Tech
PPS-CF
PPS-CF1.75 mm
Requires hardened nozzle
Composition / filler: Polyphenylene sulfide (PPS) with 10% carbon fiber reinforcement
Print parameters
| Diameter | 1.75 mm |
|---|---|
| Nozzle | 310–350 °C |
| Bed | 100 °C |
| Speed | 30–60 mm/s |
| Fan | 0–50 % |
| Drying (temp / time) | — |
| Density | 1.3 g/cm³ |
Mechanical & thermal properties
| Tensile strength | 60/–XY/ZMPa |
|---|---|
| Tensile modulus | 4750/–XY/ZMPa |
| Elongation at break | 6/–XY/Z% |
| Flexural strength | 105/–XY/ZMPa |
| Impact strength | 25/–XY/ZkJ/m² |
| Hardness | — |
| HDT (heat deflection) | 242.7°C |
| Glass transition (Tg) | — |
| VICAT | 268°C |
Data from manufacturer's website
This data comes from the manufacturer's technical sheets and website. FilamentCat only displays it — I don't guarantee it; verify with the manufacturer before printing. Values may vary by printer and conditions.