Raise3D
Hyper Core PPA GF25
PA-GF1.75 mm
Requires enclosureRequires hardened nozzle
Composition / filler: glass fiber (25 %)
Print parameters
| Diameter | 1.75 mm |
|---|---|
| Nozzle | 340 °C |
| Bed | 80 °C |
| Speed | 45 mm/s |
| Fan | — |
| Drying (temp / time) | 100 °C / 8 h |
| Density | 1.29 g/cm³ |
Mechanical & thermal properties
| Tensile strength | 105MPa |
|---|---|
| Tensile modulus | 5730MPa |
| Elongation at break | 2.41% |
| Flexural strength | 168MPa |
| Impact strength | 7.59kJ/m² |
| Hardness | — |
| HDT (heat deflection) | 118°C |
| Glass transition (Tg) | — |
| VICAT | –°C |
Data from manufacturer's website
This data comes from the manufacturer's technical sheets and website. FilamentCat only displays it — I don't guarantee it; verify with the manufacturer before printing. Values may vary by printer and conditions.