Raise3D
Hyper Speed PLA Pro
PLA1.75 mm
Requires hardened nozzle
Composition / filler: carbon powder
Print parameters
| Diameter | 1.75 mm |
|---|---|
| Nozzle | 230 °C |
| Bed | 55 °C |
| Speed | 150–500 mm/s |
| Fan | — |
| Drying (temp / time) | 60 °C / 12 h |
| Density | 1.21 g/cm³ |
Mechanical & thermal properties
| Tensile strength | 37.5MPa |
|---|---|
| Tensile modulus | 3100MPa |
| Elongation at break | 16% |
| Flexural strength | 68.5MPa |
| Impact strength | 15.5kJ/m² |
| Hardness | — |
| HDT (heat deflection) | 56.8°C |
| Glass transition (Tg) | — |
| VICAT | –°C |
Data from manufacturer's website
This data comes from the manufacturer's technical sheets and website. FilamentCat only displays it — I don't guarantee it; verify with the manufacturer before printing. Values may vary by printer and conditions.