Recreus
Balena Filaflex
TPE1.75 mm
Composition / filler: High molecular weight biodegradable polymers, naturally occurring bio-based constituents and other biodegradable modifiers; 50% biobased content
Print parameters
| Diameter | 1.75 mm |
|---|---|
| Nozzle | 195–205 °C |
| Bed | 70–80 °C |
| Speed | 6–20 mm/s |
| Fan | 0–100 % |
| Drying (temp / time) | 60 °C / 6 h |
| Density | 1.16 g/cm³ |
Mechanical & thermal properties
| Tensile strength | –MPa |
|---|---|
| Tensile modulus | –MPa |
| Elongation at break | –% |
| Flexural strength | –MPa |
| Impact strength | –kJ/m² |
| Hardness | 84A Shore |
| HDT (heat deflection) | –°C |
| Glass transition (Tg) | — |
| VICAT | –°C |
Data from manufacturer's website
This data comes from the manufacturer's technical sheets and website. FilamentCat only displays it — I don't guarantee it; verify with the manufacturer before printing. Values may vary by printer and conditions.