Recreus
Conductive Filaflex
TPU1.75 mm
Composition / filler: TPU (Thermoplastic Polyurethane) with conductive additives
Print parameters
| Diameter | 1.75 mm |
|---|---|
| Nozzle | 250–255 °C |
| Bed | 0–55 °C |
| Speed | 15–53 mm/s |
| Fan | 0–40 % |
| Drying (temp / time) | 55 °C / 1 h |
| Density | 1.33 g/cm³ |
Mechanical & thermal properties
| Tensile strength | –MPa |
|---|---|
| Tensile modulus | 100MPa |
| Elongation at break | 50% |
| Flexural strength | –MPa |
| Impact strength | –kJ/m² |
| Hardness | 92A Shore |
| HDT (heat deflection) | 50°C |
| Glass transition (Tg) | — |
| VICAT | 50°C |
Data from manufacturer's website
This data comes from the manufacturer's technical sheets and website. FilamentCat only displays it — I don't guarantee it; verify with the manufacturer before printing. Values may vary by printer and conditions.