Recreus
Filaflex 60A
Composition / filler: TPU (Thermoplastic Polyurethane)
Print parameters
| Diameter | 1.75 mm |
|---|---|
| Nozzle | 235 °C |
| Bed | 0–45 °C |
| Speed | 8–30 mm/s |
| Fan | 0–40 % |
| Drying (temp / time) | 55 °C / 1 h |
| Density | 1.07 g/cm³ |
Mechanical & thermal properties
| Tensile strength | 26MPa |
|---|---|
| Tensile modulus | –MPa |
| Elongation at break | 950% |
| Flexural strength | –MPa |
| Impact strength | –kJ/m² |
| Hardness | 63A Shore |
| HDT (heat deflection) | –°C |
| Glass transition (Tg) | -54 °C |
| VICAT | 70°C |
Data from manufacturer's website
This data comes from the manufacturer's technical sheets and website. FilamentCat only displays it — I don't guarantee it; verify with the manufacturer before printing. Values may vary by printer and conditions.