Recreus
Filaflex 95A
Composition / filler: TPU (Thermoplastic Polyurethane)
Print parameters
| Diameter | 2.85 mm |
|---|---|
| Nozzle | 245–250 °C |
| Bed | 50–55 °C |
| Speed | 17–59 mm/s |
| Fan | 0–50 % |
| Drying (temp / time) | 55 °C / 1 h |
| Density | 1.24 g/cm³ |
Mechanical & thermal properties
| Tensile strength | 33MPa |
|---|---|
| Tensile modulus | –MPa |
| Elongation at break | 500% |
| Flexural strength | –MPa |
| Impact strength | –kJ/m² |
| Hardness | 95A Shore |
| HDT (heat deflection) | –°C |
| Glass transition (Tg) | — |
| VICAT | 125°C |
Data from manufacturer's website
This data comes from the manufacturer's technical sheets and website. FilamentCat only displays it — I don't guarantee it; verify with the manufacturer before printing. Values may vary by printer and conditions.