Recreus
Filaflex SEBS
Requires enclosure
Composition / filler: SEBS (Styrene-Ethylene-Butylene-Styrene) rubber-based 3D printing filament
Print parameters
| Diameter | 2.85 mm |
|---|---|
| Nozzle | 240–260 °C |
| Bed | 50–60 °C |
| Speed | 18–62 mm/s |
| Fan | 0–40 % |
| Drying (temp / time) | — |
| Density | 0.906 g/cm³ |
Mechanical & thermal properties
| Tensile strength | –MPa |
|---|---|
| Tensile modulus | 83MPa |
| Elongation at break | 146% |
| Flexural strength | –MPa |
| Impact strength | 58kJ/m² |
| Hardness | 90A Shore |
| HDT (heat deflection) | 35°C |
| Glass transition (Tg) | — |
| VICAT | 63°C |
Data from manufacturer's website
This data comes from the manufacturer's technical sheets and website. FilamentCat only displays it — I don't guarantee it; verify with the manufacturer before printing. Values may vary by printer and conditions.