Rosa3D
ASA + Kevlar
ASA
Requires enclosureRequires hardened nozzle
Composition / filler: aramid fiber
Print parameters
| Nozzle | 250–280 °C |
|---|---|
| Bed | 70–110 °C |
| Speed | — |
| Fan | 0–30 % |
| Drying (temp / time) | 60 °C / 6 h |
| Density | 1.07 g/cm³ |
Mechanical & thermal properties
| Tensile strength | 40MPa |
|---|---|
| Tensile modulus | 2200MPa |
| Elongation at break | 6% |
| Flexural strength | –MPa |
| Impact strength | 7.3kJ/m² |
| Hardness | — |
| HDT (heat deflection) | 78°C |
| Glass transition (Tg) | — |
| VICAT | 93°C |
Data from manufacturer's website
This data comes from the manufacturer's technical sheets and website. FilamentCat only displays it — I don't guarantee it; verify with the manufacturer before printing. Values may vary by printer and conditions.