Rosa3D
BioWood
PLA1.75 mm
Composition / filler: wood
Print parameters
| Diameter | 1.75 mm |
|---|---|
| Nozzle | 170–210 °C |
| Bed | 30–50 °C |
| Speed | — |
| Fan | 100 % |
| Drying (temp / time) | 50 °C / 4 h |
| Density | 1.26 g/cm³ |
Mechanical & thermal properties
| Tensile strength | 34MPa |
|---|---|
| Tensile modulus | 3195MPa |
| Elongation at break | 3% |
| Flexural strength | –MPa |
| Impact strength | 3kJ/m² |
| Hardness | — |
| HDT (heat deflection) | –°C |
| Glass transition (Tg) | — |
| VICAT | 50°C |
Data from manufacturer's website
This data comes from the manufacturer's technical sheets and website. FilamentCat only displays it — I don't guarantee it; verify with the manufacturer before printing. Values may vary by printer and conditions.