Rosa3D
PET-G V0 FR
PETG
Print parameters
| Nozzle | 230–260 °C |
|---|---|
| Bed | 60–70 °C |
| Speed | — |
| Fan | 0–60 % |
| Drying (temp / time) | 60 °C / 4 h |
| Density | 1.26 g/cm³ |
Mechanical & thermal properties
| Tensile strength | 40MPa |
|---|---|
| Tensile modulus | 2350MPa |
| Elongation at break | 3.3% |
| Flexural strength | –MPa |
| Impact strength | 3kJ/m² |
| Hardness | — |
| HDT (heat deflection) | 58°C |
| Glass transition (Tg) | — |
| VICAT | 70°C |
Data from manufacturer's website
This data comes from the manufacturer's technical sheets and website. FilamentCat only displays it — I don't guarantee it; verify with the manufacturer before printing. Values may vary by printer and conditions.