Rosa3D
PLA LW Aero
PLA
Print parameters
| Nozzle | 220–250 °C |
|---|---|
| Bed | 40–60 °C |
| Speed | — |
| Fan | 0–20 % |
| Drying (temp / time) | 50 °C / 4 h |
| Density | 1.18 g/cm³ |
Mechanical & thermal properties
| Tensile strength | 12.4MPa |
|---|---|
| Tensile modulus | 940MPa |
| Elongation at break | 18% |
| Flexural strength | –MPa |
| Impact strength | 3.05kJ/m² |
| Hardness | — |
| HDT (heat deflection) | 51°C |
| Glass transition (Tg) | — |
| VICAT | 52.8°C |
Data from manufacturer's website
This data comes from the manufacturer's technical sheets and website. FilamentCat only displays it — I don't guarantee it; verify with the manufacturer before printing. Values may vary by printer and conditions.