Rosa3D
ROSA-Flex 96A
TPU1.75 mm
Print parameters
| Diameter | 1.75 mm |
|---|---|
| Nozzle | 220–250 °C |
| Bed | 30–60 °C |
| Speed | — |
| Fan | 0–60 % |
| Drying (temp / time) | 80 °C / 4 h |
| Density | 1.22 g/cm³ |
Mechanical & thermal properties
| Tensile strength | 55MPa |
|---|---|
| Tensile modulus | –MPa |
| Elongation at break | 350% |
| Flexural strength | –MPa |
| Impact strength | –kJ/m² |
| Hardness | 96A Shore |
| HDT (heat deflection) | –°C |
| Glass transition (Tg) | -25 °C |
| VICAT | 126°C |
Data from manufacturer's website
This data comes from the manufacturer's technical sheets and website. FilamentCat only displays it — I don't guarantee it; verify with the manufacturer before printing. Values may vary by printer and conditions.