Rosa3D
ROSA TPU 75D 15GF HT
TPU-GF
Requires enclosureRequires hardened nozzle
Print parameters
| Nozzle | 230–255 °C |
|---|---|
| Bed | 60–90 °C |
| Speed | — |
| Fan | 0–30 % |
| Drying (temp / time) | 70 °C / 4 h |
| Density | 1.31 g/cm³ |
Mechanical & thermal properties
| Tensile strength | 65MPa |
|---|---|
| Tensile modulus | 3000MPa |
| Elongation at break | 25% |
| Flexural strength | –MPa |
| Impact strength | 30kJ/m² |
| Hardness | 75D Shore |
| HDT (heat deflection) | 155°C |
| Glass transition (Tg) | — |
| VICAT | –°C |
Data from manufacturer's website
This data comes from the manufacturer's technical sheets and website. FilamentCat only displays it — I don't guarantee it; verify with the manufacturer before printing. Values may vary by printer and conditions.