Rosa3D
ROSA TPU HardTech+ 83D
TPU
Requires enclosure
Print parameters
| Nozzle | 230–250 °C |
|---|---|
| Bed | 70–100 °C |
| Speed | — |
| Fan | 0–30 % |
| Drying (temp / time) | 70 °C / 4 h |
| Density | 1.22 g/cm³ |
Mechanical & thermal properties
| Tensile strength | 66MPa |
|---|---|
| Tensile modulus | 2000MPa |
| Elongation at break | 170% |
| Flexural strength | –MPa |
| Impact strength | 8.7kJ/m² |
| Hardness | 83D Shore |
| HDT (heat deflection) | 72°C |
| Glass transition (Tg) | — |
| VICAT | –°C |
Data from manufacturer's website
This data comes from the manufacturer's technical sheets and website. FilamentCat only displays it — I don't guarantee it; verify with the manufacturer before printing. Values may vary by printer and conditions.