Smart Materials 3D
PETG Magneto
PETG1.75 mm
Requires hardened nozzle
Composition / filler: Magnetically detectable PETG (metal-filled)
Print parameters
| Diameter | 1.75 mm |
|---|---|
| Nozzle | 220–240 °C |
| Bed | 70–90 °C |
| Speed | 40–60 mm/s |
| Fan | — |
| Drying (temp / time) | — |
| Density | 1.57 g/cm³ |
Mechanical & thermal properties
| Tensile strength | 35MPa |
|---|---|
| Tensile modulus | 2450MPa |
| Elongation at break | 3.6% |
| Flexural strength | –MPa |
| Impact strength | 2.9kJ/m² |
| Hardness | — |
| HDT (heat deflection) | 64°C |
| Glass transition (Tg) | — |
| VICAT | 72°C |
Data from manufacturer's website
This data comes from the manufacturer's technical sheets and website. FilamentCat only displays it — I don't guarantee it; verify with the manufacturer before printing. Values may vary by printer and conditions.