Snapmaker
PETG HF
PETG1.75 mm
Print parameters
| Diameter | 1.75 mm |
|---|---|
| Nozzle | 240–260 °C |
| Bed | 60–80 °C |
| Speed | — |
| Fan | — |
| Drying (temp / time) | 65 °C / 6 h |
| Density | 1.3 g/cm³ |
Mechanical & thermal properties
| Tensile strength | 48MPa |
|---|---|
| Tensile modulus | –MPa |
| Elongation at break | 9.3% |
| Flexural strength | 80.1MPa |
| Impact strength | 4.95kJ/m² |
| Hardness | — |
| HDT (heat deflection) | –°C |
| Glass transition (Tg) | 71.2 °C |
| VICAT | 75°C |
Data from manufacturer's website
This data comes from the manufacturer's technical sheets and website. FilamentCat only displays it — I don't guarantee it; verify with the manufacturer before printing. Values may vary by printer and conditions.