Spectrum Filaments
HDPE
HDPE1.75 mm
Requires enclosure
Print parameters
| Diameter | 1.75 mm |
|---|---|
| Nozzle | 260–290 °C |
| Bed | 80–100 °C |
| Speed | 30–200 mm/s |
| Fan | 0–50 % |
| Drying (temp / time) | — |
| Density | 1.1 g/cm³ |
Mechanical & thermal properties
| Tensile strength | 29MPa |
|---|---|
| Tensile modulus | 3500MPa |
| Elongation at break | 18% |
| Flexural strength | –MPa |
| Impact strength | 10kJ/m² |
| Hardness | — |
| HDT (heat deflection) | 110°C |
| Glass transition (Tg) | — |
| VICAT | –°C |
Data from manufacturer's website
This data comes from the manufacturer's technical sheets and website. FilamentCat only displays it — I don't guarantee it; verify with the manufacturer before printing. Values may vary by printer and conditions.