Spectrum Filaments
HIPS X
HIPS1.75 mm
Requires enclosure
Print parameters
| Diameter | 1.75 mm |
|---|---|
| Nozzle | 230–260 °C |
| Bed | 80–100 °C |
| Speed | 40–200 mm/s |
| Fan | 0–20 % |
| Drying (temp / time) | — |
| Density | 1.05 g/cm³ |
Mechanical & thermal properties
| Tensile strength | 16MPa |
|---|---|
| Tensile modulus | –MPa |
| Elongation at break | 50% |
| Flexural strength | 50MPa |
| Impact strength | 7kJ/m² |
| Hardness | — |
| HDT (heat deflection) | 96°C |
| Glass transition (Tg) | — |
| VICAT | 87°C |
Data from manufacturer's website
This data comes from the manufacturer's technical sheets and website. FilamentCat only displays it — I don't guarantee it; verify with the manufacturer before printing. Values may vary by printer and conditions.