Spectrum Filaments
PA6 GK10
PA1.75 mm
Requires enclosureRequires hardened nozzle
Print parameters
| Diameter | 1.75 mm |
|---|---|
| Nozzle | 260–290 °C |
| Bed | 80–100 °C |
| Speed | 30–120 mm/s |
| Fan | 0–10 % |
| Drying (temp / time) | 80 °C / 12 h |
| Density | 1.01 g/cm³ |
Mechanical & thermal properties
| Tensile strength | 87MPa |
|---|---|
| Tensile modulus | 4200MPa |
| Elongation at break | 2.7% |
| Flexural strength | –MPa |
| Impact strength | 26kJ/m² |
| Hardness | — |
| HDT (heat deflection) | 0.3°C |
| Glass transition (Tg) | — |
| VICAT | –°C |
Data from manufacturer's website
This data comes from the manufacturer's technical sheets and website. FilamentCat only displays it — I don't guarantee it; verify with the manufacturer before printing. Values may vary by printer and conditions.