Spectrum Filaments
PA6 Low Warp GF30
PA-GF1.75 mm
Requires enclosureRequires hardened nozzle
Print parameters
| Diameter | 1.75 mm |
|---|---|
| Nozzle | 250–280 °C |
| Bed | 70–100 °C |
| Speed | 30–150 mm/s |
| Fan | 0–30 % |
| Drying (temp / time) | 80 °C / 12 h |
| Density | 1.34 g/cm³ |
Mechanical & thermal properties
| Tensile strength | 80MPa |
|---|---|
| Tensile modulus | 5500MPa |
| Elongation at break | 3% |
| Flexural strength | 125MPa |
| Impact strength | 4kJ/m² |
| Hardness | — |
| HDT (heat deflection) | 65°C |
| Glass transition (Tg) | — |
| VICAT | –°C |
Data from manufacturer's website
This data comes from the manufacturer's technical sheets and website. FilamentCat only displays it — I don't guarantee it; verify with the manufacturer before printing. Values may vary by printer and conditions.