Spectrum Filaments
PCTG GF10
PCTG-GF1.75 mm
Requires hardened nozzle
Print parameters
| Diameter | 1.75 mm |
|---|---|
| Nozzle | 250–270 °C |
| Bed | 60–80 °C |
| Speed | 30–150 mm/s |
| Fan | 50–85 % |
| Drying (temp / time) | — |
| Density | 1.31 g/cm³ |
Mechanical & thermal properties
| Tensile strength | 55MPa |
|---|---|
| Tensile modulus | –MPa |
| Elongation at break | 8% |
| Flexural strength | –MPa |
| Impact strength | 45kJ/m² |
| Hardness | — |
| HDT (heat deflection) | 77°C |
| Glass transition (Tg) | 10 °C |
| VICAT | 77°C |
Data from manufacturer's website
This data comes from the manufacturer's technical sheets and website. FilamentCat only displays it — I don't guarantee it; verify with the manufacturer before printing. Values may vary by printer and conditions.