Spectrum Filaments
PET-G PTFE
PETG1.75 mm
Print parameters
| Diameter | 1.75 mm |
|---|---|
| Nozzle | 240–260 °C |
| Bed | 60–80 °C |
| Speed | 40–200 mm/s |
| Fan | 75–100 % |
| Drying (temp / time) | — |
| Density | 1.32 g/cm³ |
Mechanical & thermal properties
| Tensile strength | 40/25XY/ZMPa |
|---|---|
| Tensile modulus | 1850MPa |
| Elongation at break | 3.7/–XY/Z% |
| Flexural strength | –MPa |
| Impact strength | 70kJ/m² |
| Hardness | — |
| HDT (heat deflection) | –°C |
| Glass transition (Tg) | 3 °C |
| VICAT | 70°C |
Data from manufacturer's website
This data comes from the manufacturer's technical sheets and website. FilamentCat only displays it — I don't guarantee it; verify with the manufacturer before printing. Values may vary by printer and conditions.