Spectrum Filaments
PLA Electrically Conductive
PLA1.75 mm
Requires hardened nozzle
Print parameters
| Diameter | 1.75 mm |
|---|---|
| Nozzle | 210–230 °C |
| Bed | 40–60 °C |
| Speed | 30–120 mm/s |
| Fan | 0–100 % |
| Drying (temp / time) | 50 °C / 6 h |
| Density | 1.35 g/cm³ |
Mechanical & thermal properties
| Tensile strength | –MPa |
|---|---|
| Tensile modulus | 1480MPa |
| Elongation at break | 11.8% |
| Flexural strength | –MPa |
| Impact strength | 8.7kJ/m² |
| Hardness | — |
| HDT (heat deflection) | –°C |
| Glass transition (Tg) | — |
| VICAT | –°C |
Data from manufacturer's website
This data comes from the manufacturer's technical sheets and website. FilamentCat only displays it — I don't guarantee it; verify with the manufacturer before printing. Values may vary by printer and conditions.