Spectrum Filaments
PLA Tough
PLA1.75 mm
Print parameters
| Diameter | 1.75 mm |
|---|---|
| Nozzle | 200–230 °C |
| Bed | 0–50 °C |
| Speed | 40–200 mm/s |
| Fan | ≤ 100 % |
| Drying (temp / time) | — |
| Density | 1.2 g/cm³ |
Mechanical & thermal properties
| Tensile strength | 53.2MPa |
|---|---|
| Tensile modulus | 432.8MPa |
| Elongation at break | 15% |
| Flexural strength | 71.13MPa |
| Impact strength | 2.09kJ/m² |
| Hardness | — |
| HDT (heat deflection) | 55°C |
| Glass transition (Tg) | 57.5 °C |
| VICAT | –°C |
Data from manufacturer's website
This data comes from the manufacturer's technical sheets and website. FilamentCat only displays it — I don't guarantee it; verify with the manufacturer before printing. Values may vary by printer and conditions.