Spectrum Filaments
PPS AM230
PPS1.75 mm
Requires enclosure
Print parameters
| Diameter | 1.75 mm |
|---|---|
| Nozzle | 285–330 °C |
| Bed | 90–130 °C |
| Speed | 30–120 mm/s |
| Fan | 0–10 % |
| Drying (temp / time) | 90 °C / 3 h |
| Density | 1.33 g/cm³ |
Mechanical & thermal properties
| Tensile strength | 65MPa |
|---|---|
| Tensile modulus | 3650MPa |
| Elongation at break | 2% |
| Flexural strength | –MPa |
| Impact strength | 1.3kJ/m² |
| Hardness | — |
| HDT (heat deflection) | 236°C |
| Glass transition (Tg) | — |
| VICAT | 230°C |
Data from manufacturer's website
This data comes from the manufacturer's technical sheets and website. FilamentCat only displays it — I don't guarantee it; verify with the manufacturer before printing. Values may vary by printer and conditions.