Spectrum Filaments
S Flex 85A
TPU1.75 mm
Print parameters
| Diameter | 1.75 mm |
|---|---|
| Nozzle | 200–230 °C |
| Bed | 0–50 °C |
| Speed | 15–50 mm/s |
| Fan | 0–100 % |
| Drying (temp / time) | — |
| Density | 1.11 g/cm³ |
Mechanical & thermal properties
| Tensile strength | 40MPa |
|---|---|
| Tensile modulus | –MPa |
| Elongation at break | 85% |
| Flexural strength | –MPa |
| Impact strength | –kJ/m² |
| Hardness | 85A Shore |
| HDT (heat deflection) | –°C |
| Glass transition (Tg) | — |
| VICAT | –°C |
Data from manufacturer's website
This data comes from the manufacturer's technical sheets and website. FilamentCat only displays it — I don't guarantee it; verify with the manufacturer before printing. Values may vary by printer and conditions.