Spectrum Filaments
The Filament HT PLA
PLA1.75 mm
Print parameters
| Diameter | 1.75 mm |
|---|---|
| Nozzle | 195–220 °C |
| Bed | 40–50 °C |
| Speed | 40–250 mm/s |
| Fan | 40–80 % |
| Drying (temp / time) | — |
| Density | 1.2 g/cm³ |
Mechanical & thermal properties
| Tensile strength | 44MPa |
|---|---|
| Tensile modulus | 2620MPa |
| Elongation at break | 12% |
| Flexural strength | –MPa |
| Impact strength | 2.1kJ/m² |
| Hardness | — |
| HDT (heat deflection) | 108°C |
| Glass transition (Tg) | — |
| VICAT | 140°C |
Data from manufacturer's website
This data comes from the manufacturer's technical sheets and website. FilamentCat only displays it — I don't guarantee it; verify with the manufacturer before printing. Values may vary by printer and conditions.