Sunlu
ABS-FR
ABS1.75 mm
Requires enclosure
Print parameters
| Diameter | 1.75 mm |
|---|---|
| Nozzle | 240–260 °C |
| Bed | 80–100 °C |
| Speed | 50–200 mm/s |
| Fan | — |
| Drying (temp / time) | 50 °C / — |
| Density | 1.1 g/cm³ |
Mechanical & thermal properties
| Tensile strength | 33MPa |
|---|---|
| Tensile modulus | –MPa |
| Elongation at break | 10% |
| Flexural strength | 54MPa |
| Impact strength | 13kJ/m² |
| Hardness | — |
| HDT (heat deflection) | 84°C |
| Glass transition (Tg) | — |
| VICAT | –°C |
Manufacturer data
This data comes from the manufacturer's technical sheets and website. FilamentCat only displays it — I don't guarantee it; verify with the manufacturer before printing. Values may vary by printer and conditions.