Sunlu
ASA
ASA1.75 mm
Requires enclosure
Print parameters
| Diameter | 1.75 mm |
|---|---|
| Nozzle | 250–280 °C |
| Bed | 80–100 °C |
| Speed | 50–200 mm/s |
| Fan | — |
| Drying (temp / time) | 80 °C / — |
| Density | 1.05 g/cm³ |
Mechanical & thermal properties
| Tensile strength | 50/–XY/ZMPa |
|---|---|
| Tensile modulus | –MPa |
| Elongation at break | 20% |
| Flexural strength | 73MPa |
| Impact strength | 18/–XY/ZkJ/m² |
| Hardness | 82HD Shore |
| HDT (heat deflection) | 96°C |
| Glass transition (Tg) | 108 °C |
| VICAT | 105°C |
Data from manufacturer's website
This data comes from the manufacturer's technical sheets and website. FilamentCat only displays it — I don't guarantee it; verify with the manufacturer before printing. Values may vary by printer and conditions.