Sunlu
PC
PC1.75 mm
Requires enclosure
Print parameters
| Diameter | 1.75 mm |
|---|---|
| Nozzle | 270–300 °C |
| Bed | 90–110 °C |
| Speed | 30–80 mm/s |
| Fan | — |
| Drying (temp / time) | 80 °C / — |
| Density | 1.15 g/cm³ |
Mechanical & thermal properties
| Tensile strength | 50/–XY/ZMPa |
|---|---|
| Tensile modulus | –MPa |
| Elongation at break | 25% |
| Flexural strength | 77MPa |
| Impact strength | 35/75XY/ZkJ/m² |
| Hardness | 80HD Shore |
| HDT (heat deflection) | 101°C |
| Glass transition (Tg) | — |
| VICAT | –°C |
Data from manufacturer's website
This data comes from the manufacturer's technical sheets and website. FilamentCat only displays it — I don't guarantee it; verify with the manufacturer before printing. Values may vary by printer and conditions.