Sunlu
PEEK
PEEK1.75 mm
Requires enclosure
Print parameters
| Diameter | 1.75 mm |
|---|---|
| Nozzle | 390–420 °C |
| Bed | 110–120 °C |
| Speed | 30–60 mm/s |
| Fan | — |
| Drying (temp / time) | 110 °C / 6 h |
| Density | 1.1965 g/cm³ |
Mechanical & thermal properties
| Tensile strength | 77MPa |
|---|---|
| Tensile modulus | –MPa |
| Elongation at break | 21% |
| Flexural strength | 122MPa |
| Impact strength | 138kJ/m² |
| Hardness | — |
| HDT (heat deflection) | 147°C |
| Glass transition (Tg) | 143 °C |
| VICAT | –°C |
Manufacturer data
This data comes from the manufacturer's technical sheets and website. FilamentCat only displays it — I don't guarantee it; verify with the manufacturer before printing. Values may vary by printer and conditions.