Sunlu
PLA
PLA1.75 mm
Print parameters
| Diameter | 1.75 mm |
|---|---|
| Nozzle | 200–230 °C |
| Bed | 50–65 °C |
| Speed | 50–100 mm/s |
| Fan | — |
| Drying (temp / time) | 50 °C / — |
| Density | 1.23 g/cm³ |
Mechanical & thermal properties
| Tensile strength | 40/–XY/ZMPa |
|---|---|
| Tensile modulus | –MPa |
| Elongation at break | 10% |
| Flexural strength | 65MPa |
| Impact strength | 5/4.5XY/ZkJ/m² |
| Hardness | 80HA Shore |
| HDT (heat deflection) | 55°C |
| Glass transition (Tg) | 63 °C |
| VICAT | 54°C |
Data from manufacturer's website
This data comes from the manufacturer's technical sheets and website. FilamentCat only displays it — I don't guarantee it; verify with the manufacturer before printing. Values may vary by printer and conditions.