Sunlu
PLA+
PLA1.75 mm
Print parameters
| Diameter | 1.75 mm |
|---|---|
| Nozzle | 200–230 °C |
| Bed | 50–65 °C |
| Speed | 50–100 mm/s |
| Fan | — |
| Drying (temp / time) | 50 °C / — |
| Density | 1.23 g/cm³ |
Mechanical & thermal properties
| Tensile strength | 64/–XY/ZMPa |
|---|---|
| Tensile modulus | 3570MPa |
| Elongation at break | 17% |
| Flexural strength | 86MPa |
| Impact strength | 3.5/–XY/ZkJ/m² |
| Hardness | 85.5HD Shore |
| HDT (heat deflection) | 53°C |
| Glass transition (Tg) | 61 °C |
| VICAT | 54°C |
Data from manufacturer's website
This data comes from the manufacturer's technical sheets and website. FilamentCat only displays it — I don't guarantee it; verify with the manufacturer before printing. Values may vary by printer and conditions.